Vehicle setups and rider profiles

Steps

1. 1

   Enter the setup

   In Vehicle setup, choose the Current vehicle or New vehicle and give a Setup name. Pick a category (Chassis and geometry, Engine, Transmission, Suspension, Tires, Brakes, Aerodynamics, Notes, Custom or Other), click Add parameter, search, click Done adding and enter values such as tyre pressures, preload or damping clicks.

2. 2

   Reuse and save

   Reuse and references can Apply selected setup, or take a Model reference with Fill empty fields only. Click Save and apply to this record. Compare setups shows saved setups side by side, with Show differences only.

3. 3

   Create rider profiles

   Open Rider information and click + (New rider). Fill in Basic details (Name is required; Number, Team, Class), Identity color, Body and equipment (Height, and Rider mass With equipment, Body only or Unspecified), Custom details (up to 20) and Notes, then click Add rider.

4. 4

   Assign the whole recording

   In Record info → Rider, choose a rider under Whole recording. Manage riders opens the rider library.

5. 5

   Split by lap or at a stop

   Under Assign by lap, click laps (Shift-click for a range) and choose Assign to…. Rider changes suggested from stops lists stops of at least 20 s below about 5 km/h; Change rider here… switches riders from the middle of that stop. Click Save or press ⌘/Ctrl+S.

6. 6

   Adjust the timeline

   The timeline shows each rider's color. Drag a rider change; it snaps to lap starts and ends and to stop midpoints, and ←/→ move it by 1 s (Shift: 10 s).