Batch analysis and combined recordings

Steps

1. 1

   Set up a recipe

   In Analysis, choose File → Batch report…. Under Recipe pick a saved recipe or New recipe and name it. In Report contents, Minimum value, Maximum, Mean and RMS are on by default; add Valid sample count, Valid duration s or Event count. Distribution details is on by default, with Bins from 8 to 64.

2. 2

   Add recordings

   Use Add recording to add up to 64 recordings; the current one is already in the list.

3. 3

   Bind each recording

   On each card choose the Channel, a Condition (All data by default), the Scope (Entire session / selected laps, or a corner) and up to 128 laps, plus GPS when several sources exist. Click Confirm bindings; the card then shows Bound ·.

4. 4

   Run and export

   Click Run analysis; Stop cancels. Results have one row per recording, or one per lap when laps are selected. Export CSV, JSON, Print / PDF or Distribution CSV at the bottom; Save keeps the recipe in the workspace.

5. 5

   Combine recordings

   In Start center, click Merge / join. Enter a New record name (Combined record by default) and choose the Method: Merge: separate channels from each source, or Concatenate: join matching layouts in sequence.

6. 6

   Check the plan and create

   Tick 2–8 sources, set each source's Time offset (seconds) for a merge or Preceding gap (seconds) for a concatenation, and order them with Move up and Move down. Preview plan shows channels, time span, overlap and gaps; then click Create new record and Open new record.